What Is Blown In Insulation?
Blown in insulation is a way of spraying insulation in the gaps between the walls, attics, and floors. This type of insulation is also referred to as blow in insulation. Typically an electric blower is used to handle this type of work. There are different methods used based on the particular type of insulation being applied to the area. Blown in insulation is an ideal way to add insulation to an existing structure because it is non-invasive. The alternative to this is to rip out the drywall, install fiberglass insulation, and then replace the drywall.
Should Your Structure Have Blown In Insulation?
If you only want to add insulation to an existing structure, then blown in insulation is your best option. It has less settling and a higher grade of performance over time. There are no added complications with blown in insulation. It creates a solid barrier between the walls of your house and the outside. If you are planning a remodel that requires you to remove old drywall, then this may not be the best insulation option.
Different Types of Blown In Insulation
The two different types of blown in insulation are cellulose and fiberglass. Fiberglass insulation is constructed of sand or glass. Cellulose, on the other hand, is constructed from recycled newspaper that is treated with chemicals that are fire-resistant. While both types have similar R values, the cellulose option settles more, decreasing the overall R-value.
Benefits of Blown In Insulation
Fiberglass insulation is easily applied with a blower. It is ideal for attics and inside walls. This type of insulation does not absorb moisture and is able to resist mold and rot, which other types of insulation may call the victim. Other types of insulation take a significant amount of time to dry once wet. The inability to dry is what makes them more susceptible to mold.
How Blown In Insulation Works in Walls and Attics
A small hole is made in the wall close to the ceiling. Another gap is made close to the floor. Any extra holes that are needed are about 16 inches apart. Insulation is forced into the holes in the wall by a blowing machine. The insulation is pushed through the holes and fills up all the space. A professional like King Insulation knows where wire and other blockers are located and works around them to get the best insulation results possible. The holes are covered with a plastic plug which is painted to create a seamless look.
When it comes to attics, all air leaks are sealed, especially around pipes and wires. All vent chutes are repaired or added as needed. The areas around the attic are insulated and sealed to prevent insulation from coming through the hatch in the attic.
Why Choose King Insulation
King Insulation has been meeting the insulation needs of Arizona for over 30 years. No matter what your insulation needs are, King Insulation has you covered. They have decades of experience in energy-saving insulation. Contact them today to find out more about blown in insulation.
